Ammo plinking test ?/9mm 3" barrel

Dropping my reloads in diamondback 3" barrel (9mm) . Their all down below hood like they should be but some drop a tiny bit lower. My reloaded brass. Could it cause lite strikes on some of them being lil' lower? What is problem?

They all plink down in chamber.

workin @ Ft. bragg

Boolit Master Join DateJan 2010LocationTom, in Gloucester, VAPosts900

Try them and see how they shoot. You'll know if your reloads are okay if you're happy when you go to the range.

workin @ Ft. bragg

seein as how the 9m headspaces on the front of the case i'm gonna go with some of your cases are shorter.

it's all an educated guess,,,, till the trigger is pulled.

the more i find out about shootin boolits, the more it contradicts everything i ever learned about shooting jaxketed.

Either seat the boolits a touch longer or use a hair less taper crimp or both.
Go to far and they won't work, but sounds like you have room to adjust a bit.

Bill

If it was easy, anybody could do it.

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here