Acceptable Fireball???

Sounds like a fine load to me. Although, a bit expensive in component bullets. For that purpose, I would consider a nice cast lead bullet.

The place I shoot has a phenomenal array of steel plates, so that's what I shoot most. They do have limits on what we can hit them with however, so I recently built and tested a load for my 7.5" barreled Redhawk .44 Mag-- a 240 grain cast LSWC with 5.7 grains of Titegroup under it. It gave me very consistent results over the chrono at 870 feet per second. There's no doubt that in .44 Magnum, it's a very mild load.

Pure please to shoot, drops steel plates nicely without beating the snot out of them and it's very low in cost, mostly because of the bullet.

I chose Titegroup because in that LARGE .44 Magnum case, a light charge can get erratic with too much empty space, and Titegroup has a well-earned reputation for being very insensitive to powder position in a large case. It seems like a VERY good load for me. Whole lot of fun.

__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.

View the original article here

Acceptable replacement for red'n'tacky#2??

Boolit Man Join DateApr 2012LocationOntario, Can!Posts103

I was picking up some pulleys for work and noticed they had a blue grease for pillow block bearings and electric motors. I like the blue colour of it and want to swap it for a batch of Ben's red lube.

Here is the msds for it.
http://www.timken.com/en-us/products/lubrication/Documents/Spec_Sheets/timken_ball_bearing_pillow_block_grease_eng.pdf

Thanks!

spawn i'd study up on that poly urea part a little bit.
it has a stickiness that is well umm sometimes kinda, it is hard to get off things.

it's all an educated guess,,,, till the trigger is pulled.

the more i find out about shootin boolits, the more it contradicts everything i ever learned about shooting jaxketed.

It turns hard with the application of too much heat and it becomes a solid "bearing". Problem is that the solid bearing created is almost never as "round" as it should be. Therefore, pay attention to what Lamar said. ... felix

Boolit Man Join DateApr 2012LocationOntario, Can!Posts103

Good points. I will try heating some up on a sheet of metal and see how it reacts to heat.

Mystic JT6 red lithium complex. Same basic stuff.

Gear

You can't fix Stupid, but you can occasionally head it off before it hurts something. --Stephen Adams

Being able to separate the wheat from the chaff has always been a valuable skill in all of life's activities. --Bwana

Boolit Man Join DateApr 2012LocationOntario, Can!Posts103

I can get red'n'tacky no problem but I am just trying to mess around as well i would like blue lube.

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here

Acceptable performance from 308?

I've been developing a load using a Mihec 311180 in a Ruger M77MkII for a good buddy of mine.
The boolits fall from the mold a little light and I've weight separated them. The first lot weighing 171.0-171.9g unlubed and no check.

Using a Hornady check, Bens Red lube, Winchester primer, Hornady match brass and WC 844T I've found the sweet spot at 30.5g. It will shoot a 10 shot group inside 1.5 inches with most holes touching at fifty yards. After 100 rounds three dry patches removed the soot and the bore was sparkling.

Recoil is almost nonexistent. Feeding is flawless.

One round was fired into (4) two liter bottles full of water. The first three were obliterated (seriously! Pieces everywhere!)and the bullet entered but did not exit the fourth. Expansion was picture perfect and the recovered slug weighed in at 154g. Not bad weight retention I think.

I'm not much for a hunter but what do you guys think about that for white tail deer inside 150-200 yards?
I could push it faster but accuracy was starting to suffer badly at 31.5g and 32.0g. As in five inch groups at best.

I'm surprised after 100 rounds , you could even see the rifling shooting with Ben's Red.

You know em' ole lead bullets ain't no good !

Ben

Last edited by Ben; Yesterday at 01:02 PM.

I swear the ole boy for whom I'm loading said he'd heard the same thing about cast boolits but he trusts me and now....well, he just grins and shakes his head.

He doesn't cast or reload yet but he did ask me "Where's all these idiots on the Internet and gun shop counters come from? It's plain as day they don't know what the hlll they're talkin 'bout. Sorry I doubted you. "

I once read of a man who shot in cast bullet competition with a Springfield 1903-A3. He traveled from shoot to shoot.

Seems he fired about 800 rounds through his rifle winning many of the competitions and placing high in the remainder that he didn't win.

Guess what ,.............. he never cleaned his bore.

Yes, there are A LOT of people with exaggerated misunderstandings about cast bullets in center fire rifles.

Through the years, people have listen to ( and believed ) a lot of BS generated in coffee shops, etc. about how bad lead bullets are for a rifle.

Ben

Did you do a rifling setback test also? You need to be able to hit the lungs at any range...that's the size of an 9" paper plate roughly. You should be ok with that level of accurady.

No. Didn't. I seated the boolit out as far as I could without exposing the single lube groove but still giving myself something to crimp on to.

I'd say that was/is a very acceptable load........

Larry Gibson

I remember my first cast boolit hog. I used a TC Encore pistol chambered in 308. With a 170 grain boolit traveling just over 1500 fps, at 75 yards it gave me a DRT on a 220 or so pound hog. My wife witnessed it. Your load is more than adequate for deer and hogs out to 200 yards. Shoot it a lot, learn it, love it.

I came into this world kicking, screaming, and covered in someone elses blood. I plan to go out the same way.

Thanks guys. I kinda figured so, I just want to share another success. We're gonna step it back to 100 and then 200 yards. If all goes well, I'm going to set up some more water jugs and see what it'll do at 200 yards. If he can hit that milk jug at 200, he'll be taking deer with it this winter.

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here