First batch from NOE 311-180gr

Boolit Master Join DateMay 2012LocationRepublic of Texas, District of Round Rock.Posts261

First - Thanks to Al and NOE, this is one sweet mold.
Cleaned it up as instructed, preheated as directed,
On the very first cast, opened the sprue and lubed everything as directed, then dropped the first spawning.

And never looked back.
ONE bullet from the first cast was a reject, that is truly amazing.
8# of 24BHN later, There magically appeared a pile of perfectly proportioned long beautiful elongated projectiles.
I have a whole boxful of molds of just about every description. This has to be the smoothest casting and dropping mold I have ever used.
I can't wait to get these things gas checked, lubed and loaded.
I have great expectations for this bullet. (IE: White tail in November)

Griz44Mag
Christian
NRA member, NRA Range Saftey Officer
TSRA
CHL Instructor
Constitutionalist

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here

Today I made my first batch of Ben's Red.....

And everything was going smoothly until I added the transmission fluid witch ended up being 10% instead of 5%. So I continued and added approx. another 10% Bee's wax before finishing up with the 5% STP. I heated and mixed everything very well as I added each different ingredient and it did set up in a fairly short period of time outside at 48 degrees. I have it in the freezer now and it looks a bit more like Ben's Purple or Maroon than Ben's Red. I also substituted Ford Mercon Tranny fluid because that is what I had. Hopefully it will be at least close to Ben's Red in performance. Is it possible to reheat the batch and try and improve on it once it has cooled? I still have a bit of Lucas red-n-tacky I could add if it is to hard to pan lube with.

Smokepole50

My guess it will be softer due to the additional ATF. It can be remelted and modified. The Ford fluid must have contributed the darker color, mine is a light pastel Red using the Dexron fluid. If I ever need to make another batch, I made a Large one, I will add some red candle dye.

Well I cut it up today in bars and it is firm and slightly tacky but it does not have the smooth sides at the cuts like I see with Ben's pictures. I did not filter the lube when I pore it into the pan, is this important? I did notice some very small pieces of un-dissolved red-n-tacky in the mix, do these need to be filtered out?

they will mix in with each re-melting.
if you followed my directions where you melt the grease first you don't have that issue.
oh dexron atf contains mercon anyway so no big deal it's the type f that has the friction adders.

it's all an educated guess,,,, till the trigger is pulled.

the more i find out about shootin boolits, the more it contradicts everything i ever learned about shooting jaxketed.

Yes I saw your directions last night after I had already made the batch, I will try that next time. I think I will need to make the next batch outside if I get the red-n-tacky that hot as the stove exhaust fan barely kept up with the bee's wax and grease mixture smoke.

Is the lube normally tacky on the sides when it is cut into bars? Maybe I need to do a remelt of the whole batch and add some additional bee's wax behond what I have already added to try and correct my mistake. If so, should I also add in a bit more JPW to the mix as well? My gut feeling tells me it is about right comparing it to the tackiness of the BLUE lubes I have seen on store bought boolits. As well, it seems to be about right for cookie cutter type lube but I have yet to do any of this so I am just guessing.

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here