Possibly the most innovative 1911 in years.

Possibly the most innovative 1911 in years. As folks know last year Colt won the contract for supplying up to 12,000 new 1911s to the Marine Corps' Special Operations Command. The guns are upgraded versions of of the stainless steel Colt Rail Gun.

The Marine Corps' MARSOC had for decades been rebuilding the Colt 1911s it had been using since it last received guns from Colt at the end of WWII. This is the first new order of 1911s for MARSOC in some time.

MARSOC worked closely with Colt on the development of the gun. Areas strengthened included the slide and frame, the recoil spring system, the grip screws and bushings, a number of internal parts, etc.

In the link I'm attaching below Hilton Yam, the pistol smith, reviews these items at length in several parts. There is a discussion there as well that is worth reading.

The gun is in production. The identical gun is also being offered for civilian sale as well.

http://modernserviceweapons.com/?p=3126

This looks to be one of the more innovative and well designed 1911s in years. Colt and the Marines did a good job it seems.

tipoc

View the original article here

mould possibly out of round

Boolit Master Join DateJan 2012Posts153

How common is it for a mould to be slightly out of round? I ask because I used my Lyman mould for the first time to make .45 SWC's. I pushed them through the sizer and they were pretty close to size already but parts of the boolit circumference are getting sized (looking shiny), and parts are not contacting the inside of the sizer. I've noticed this also with Lee boolits. How much of a concern is this with accuracy if they are slightly out of round?

Perhaps you should measure the boolits as dropped from the mould. Sometimes the sizer can be out of alignment and cause this symptom.

But, yes, of all the moulds I own, none of them cast a perfectly round boolit. I can accept an "as cast" boolit that is .001" to .003" out of round.

You cannot discover new oceans unless you have the courage to lose sight of the shore

Rare to get a perfect boolit from any mold but .454 is right about most sizers. I went to Lee push through to get better results.
Heat on the mold will expand the center of the cavity half out and also the edges out so they will be larger at the parting line.
Until I figure how to make a cherry to cut an oblong hole, I live with it.
I have found I can make the mold hot and re-cut by hand with the cherry to get a rounder boolit.

but I think james and myself are the only two here that believe that..

it's rare to find a mold within more than .001 roundness.
it is easier to get a near round hole in a sizer die, but the barrel will quite often mess it all up again.

it's all an educated guess,,,, till the trigger is pulled.

the more i find out about shootin boolits, the more it contradicts everything i ever learned about shooting jaxketed.

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here