Advice for rossi 44 magnum rifle.

Boolit Mold Join DateMay 2013Posts13

Just picked up a rossi 44 magnum rifle in a trade. Wondering what molds and dies people use. Will just be a plinking gun and maybe hunt deer with it. I know these have a bigger boar than normal so advice for a mold that drops fatter bullets would be nice. Thanks in advance.

it may or may not have the 432 barrel.
I shoot 430 in mine.
anyway a 240gr rnfp will be your ticket to happiness and simplicity.

it's all an educated guess,,,, till the trigger is pulled.

the more i find out about shootin boolits, the more it contradicts everything i ever learned about shooting jaxketed.

Boolit Man Join DateJul 2009LocationOakley IdahoPosts104

I use a 429244 in mine slides through my Winchester like butter.

I use the 429-667 Rf 240 grainer, mine doesn.t like SWC's, but sized .431, those shoot well.

_________________________________________________It's not that I can't spell: it is that I can't type.

Boolit Master Join DateFeb 2010LocationFinland, west coastPosts565

I shoot .431" in mine and it does alright, only ever needed a bronze brush and some oil to clean out the worst, usually just a boresnake through it is enough.

Mine was a tigre model with the medallion of the jaguar on the side. It did Ok with the 429421 and wc820 in quantities to hurt your shoulder.

[The Montana Gianni] Front sight and squeeze

Boolit Mold Join DateMay 2013Posts13

Thanks for the advice. When i can order a mold that is in stock i will update.

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here