Lee Auto disk powder measure

Can you double disk this model of powder measure (the one with the square reservoir) for dispensing larger quantities?

yes , in fact IIRC the dbl disk kit came along before the pro powder measure
i also have to state that the pro upgrade is usually inexpensive and works , between the wiper , the on and off and the knurled nuts ...well they're worthy upgrades in my humble opinion !!! ( everything but the teflon coating and i suppose one could do that at home if they was determined enough ! umm i wasnt :P )

" To sit in judgment of those things which you perceive to be wrong or imperfect is to be one more person who is part of judgment, evil or imperfection."
Wayne Dyer if it was easy would it be as worthy ? or as long of lasting impression ? the hardest of lessons are the best of teachers [shrugz]

It appears that you can I got this from the Lee websight: MICRO DISK

DOUBLE DISK KIT
Stack two disks to not only double the capacity,
but enable adjustment as fine as .1 to .2 grain. Over
13,000 loads easily calculated from the expanded
selection chart on reverse. Kit includes set of 4
extra disks, 2 hopper risers and screws.
Instructions for Insta llation
of the Dou ble Disk Kit
1 Install the spacers between the hopper and
casting as shown above, using the longer screws
provided.
2 Now you can install two (2) disks at a time.
If using different size cavities, always be certain
the smaller cavity is on the top next to the hopper.
Otherwise, the smaller hole will have a ledge to
retain some of the powder.
CAUTION Never use cavities with great difference in size as some of the powder could
leak past the cavity into the center opening of the disk. This will cause an overcharge.
The safe combinations are listed on the schedule.

You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your postsForum Rules

Abbreviations used in Reloading
Pointed Soft Point "Core Lokt"

View the original article here